.. _global_mb_bb: ##### mB_BB ##### Body wave magnitude at teleseismic distances similar to mb Description =========== The name **mB** is used in |scname| as a synonym for **mB_BB** which is recommended by the IASPEI commission (:cite:t:iaspei-2013). mB is a magnitude based on body waves like :ref:global_mb, but with the amplitude measured in a broad frequency range and longer time windows. Instead of amplitude measurements on displacement data together with the dominant period, the maximum velocity amplitude Vmax is taken directly from velocity-proportional records with :math:V = 2 \pi A/T. The time window for the measurement can be determined by the duration of the high-frequency (1-3 Hz) radiation (:cite:t:bormann-2008). This time window usually contains the phases P, pP, sP, PcP, but not PP. According to the long time window and broad frequency range used for amplitude measurements mB saturates not like mb. Amplitude --------- The mB amplitudes are calculated on vertical-component displacement seismograms in accordance with :cite:t:bormann-2008 and similar to :ref:mb . A default time window of 60 s is considered for amplitude measurements at stations in the distance range of 5° to 105°. If the epicentral is known, the length of the time window after the P wave onset is .. math:: t = min(11.5 \Delta, 60) where :math:\Delta is the epicentral distance. The methods for measuring amplitudes are configurable in the global bindings. Station Magnitude ----------------- The mB station magntiudes are calculated in accordance with :cite:t:bormann-2008. .. math:: mB = \log \left(\frac{A}{2\Pi}\right) + Q(h,\Delta) - 3.0 with A as the displacement amplitude in micrometers, T as the dominant period of the signal in seconds, Q as a correction term for depth and distance. * Amplitude unit in |scname|: **nanometers/s** (nm/s), * Time window: 60 s if set by :ref:scautopick, otherwise 0 s - 11.5 * distance (deg) with 60 s minimum * Default distance range: 5 - 105 deg, configurable: :confval:magnitudes.mB.minDist, :confval:magnitudes.mB.maxDist, * Depth range: no limitation. .. note:: In 2013 the IASPEI commission (:cite:t:iaspei-2013) recommended a minimum distance of 20 deg. However, the calibration formula (:cite:t:bormann-2008) which is integrated in |scname| allows the extension down to 5 deg while maintaining consistent magnitudes at 20 deg and beyond. Therefore, 5 deg is used as the default in :confval:magnitudes.mB.minDist. Network magnitude ----------------- By default, the trimmed mean is calculated from the station magnitudes to form the :term:network magnitude. Outliers beyond the outer 12.5% percentiles are removed before forming the mean. Configuration ------------- Adjust the configurable parameters in global bindings in the mB section or use :file:global.cfg as :ref:global_mlv. Add mB to the list of computed amplitudes and magnitudes in the configuration of :ref:scamp and :ref:scmag and in :ref:scesv or :ref:scolv for visibility.